show advanced search
-
141-160 / 423
- display number
-
order by date
-
order by researcher's name
-
order by affiliation
2019-0312-05
Nanotechnology / Materials
posted：2019/04/22
High Energy Density LIB Full Cells with Original CNT Sponge-Based S Cathode and Si Anode
NODA, Suguru Professor (Faculty of Science and Engineering School of Advanced Science and Engineering)
collaborative researchers：HORI, Keisuke Research Associate
● Original CNT Sponge-Based Battery – holds highly capacitive active materials (S cathode and Si anode) within light-weight, conductive, flexible CNT matrix, allows reversible volume change (S expands and Si shrinks during discharge) while conserves the total cell volume● Nove...
2019-0312-04
Nanotechnology / Materials
posted：2019/04/22
Heat-Resistant Separator Made of Boron Nitride Nanotubes and Integrated Cathode/Separator/Anode for Light-Weight Batteries
NODA, Suguru Professor (Faculty of Science and Engineering School of Advanced Science and Engineering)
collaborative researchers：HORI, Keisuke Research Associate , 金子 健太郎
● Boron nitride nanotube (BNNT) separator (>>500 C). Binder-less, high porosity, high ion diffusivity.● NEW integrated structure of cathode/separator/anode. Thin-layer stack offering ion diffusivity & mechanical stability.● Light-...
2019-0312-03
Nanotechnology / Materials
posted：2019/04/22
Anisotropic Conductive Film of Ag-Cellulose Nanofiber Aerogel
NODA, Suguru Professor (Faculty of Science and Engineering School of Advanced Science and Engineering)
collaborative researchers：川上 慧
● Structure is only nanofibers (e.g. cellulose), conductive particles, and Air● High conductivity due to the presence of particles NOT covered with resin● Air insulation between adjacent electrodes
2019-0312-02
Nanotechnology / Materials
posted：2019/04/22
Flexible antenna coil for biological tissues
TAKEOKA, Shinji Professor (Faculty of Science and Engineering School of Advanced Science and Engineering)
collaborative researchers：FUJIE, Toshinori Guest Researcher , 鉄 祐磨
● An inkjet-printed line was annealed at 250℃ for realizing low resistive (2.9×10-5 Ω・cm) on a glass substrates.● A low resistive printed line was transferred onto the low heat durable materials (Tg: 56℃) thanks to the cleavage of the multi-stacked graphene flakes.
2053
Life sciences
posted：2019/04/19
チキソトロピー性を有するゲルを用いる多層3次元細胞培養足場システム
TAKEDA, Naoya Professor (Faculty of Science and Engineering School of Advanced Science and Engineering)
2019-0312-01
Nanotechnology / Materials
posted：2019/03/12
High Temperature Resistant Die Bonding Formed by Al/Ni Nano-particles Composite Paste
TATSUMI, Kohei Professor (Faculty of Science and Engineering Graduate School of Information, Production, and Systems) (retired)
collaborative researchers：TANAKA, Yasunori Research Associate (retired)
● Verification of void reduction effect by Al microparticle mixing ● Verification of stress relaxation effect of junction structure formed by Ni nano-/Al micro-particles composite paste● Evaluation of high heat resistance using SiC-SBD
2018-1123-09
Life sciences
posted：2018/11/30
Ear thermometer for heat illness prevention
NAGASHIMA, Kei Professor (Faculty of Human Sciences)
● Health risks associated with hot climate during labor and sports are increasing. ● However, there are no effective bio-sensing devices to predict or judge such personal risk. ● We need to develop an accurate and simple device evaluating deep body temp...
2018-1123-08
Life sciences
posted：2018/11/30
A method of isolating reporter cells by a highly sensitive trap vector system
SEMBA, Kentaro Professor (Faculty of Science and Engineering School of Advanced Science and Engineering)
collaborative researchers：小林 雄太 , 若林 佑太郎
● To highly express the fluorescent reporter protein in isolation, GAL4-UAS system was employed.
2018-1123-07
Life sciences
posted：2018/11/29
Natural compounds affecting cell differentiation
NAKAO, Yoichi Professor (Faculty of Science and Engineering)
● In vitro neural differentiation model using embryonic stem cell● Search for active compounds from marine organisms and foods
2018-1123-06
Life sciences
posted：2018/11/29
Chemo-enzymatic amide synthesis
KINO, Kuniki Professor (Faculty of Science and Engineering School of Advanced Science and Engineering Department of Applied Chemistry)
● A novel chemo-enzymatic reaction for the amide synthesis. ❍ Enzymatic reaction: activation of the carboxyl group of the substrate. ❍ Chemical reaction: nucleophilic substitution reaction to be various amides.
2018-1123-05
Life sciences
posted：2018/11/29
Biological Implant Material with Bone Seeking
MIZUNO, Jun Guest Senior Researcher (retired)
collaborative researchers：塩澤 茉由子 (retired), KUWAE, Hiroyuki Assistant Professor (retired), SHOJI, Shuichi Professor (retired)
● Control surface morphology of implant in nanoscale. ● Combination of large and small nanostructures which has different functionalities, respectively.● Nanostructure formation process applicable for curved surfaces.
2018-1123-04
Life sciences
posted：2018/11/29
Artificial blood vessel unit for fabrication of artificial organ
UMEZU, Shinjiro Professor (Faculty of Science and Engineering School of Creative Science and Engineering)
collaborative researchers：SAKAGUCHI, Katsuhisa Part-time Lecturer , 秋元 渓 , 大矢 貴史
● Luminal structure was fabricated by using titanium wire and hydrogel. ● Artificial vascular structures are created by using vascular endothelial cells adhered titanium wire. ● Artificial vascular structures were perfused with culture medium.
2018-1123-03
Life sciences
posted：2018/11/28
Reproduction model device for cerebral aneurysm
YAGI, Takanobu Part-time Lecturer (Faculty of Science and Engineering Waseda Research Institute for Science and Engineering)
collaborative researchers：SAKAGUCHI, Katsuhisa Part-time Lecturer
● Establishment of a novel ex vivo technique of reproducing cerebral aneurysm.● Reproduce diseased state of the arteries from healthy by hemodynamic loading.● Reproduce degenerative change of arteries due to aberrant hemodynamics.
2018-1123-02
Life sciences
posted：2018/11/28
An innovative technology for plant size enhancement and control:Artificial control of the cytoplasmic streaming
TOMINAGA, Motoki Professor (Faculty of Education and Integrated Arts and Sciences)
● Cytoplasmic streaming, the common transport system in the plant, was accelerated artificially.● Myosin XI motor domain was genetically exchanged by that of Chara myosin XI, which is the fastest motor protein.
2018-1123-01
Life sciences
posted：2018/11/28
Cellulose Nanofibers for Application in Regenerative Medicine ～ Fabrication of Engineered Tissues by Cell Culture in Thixotropic Gel ～
TAKEDA, Naoya Professor (Faculty of Science and Engineering School of Advanced Science and Engineering)
● Cellulose nanofiber (CNF) hydrogel is used for cell culture scaffold (Fig. 1).● Prepare coaxial two-layer long fibrous gel with microfluidic device (Fig. 2,3).● Cells are embedded in the CNF gel of the core layer and 3D cultured to fabricate long muscle and...
2018-1026-07
Environment
Nanotechnology / Materials
posted：2018/11/15
Low-cost energy harvester using thin piezoelectric polymer film
SEKIGUCHI, Tetsushi Senior Researcher (Research Council (Research Organization) Institute for Nanoscience ＆ Nanotechnology) (retired)
collaborative researchers：笹川 健太 (retired), SASAKI, Toshio Junior Researcher (retired), 中嶋 宇史 (retired), SHOJI, Shuichi Professor (retired)
● Making thin membrane by spin coating of polymer. ● Making electrode by ink jet printer.● Poling process is not needed.
2018-1026-05
Nanotechnology / Materials
Manufacturing Technology
posted：2018/11/15
Fabrication of nano-optical patterns by electron beam irradiation
IMURA, Kohei Professor (Faculty of Science and Engineering School of Advanced Science and Engineering)
collaborative researchers：KAMURA, Yoshio Research Associate
● Nano-scale optical pattern was fabricated by electron beam irradiation ● Polymer was used for inducing unique optical properties● Luminescence properties were controlled by tuning the condition
1907
Life sciences
posted：2018/11/13
特許第6883845号
特許第6883845号 アストロサイト分化促進用組成物
NAKAO, Yoichi Professor (Faculty of Science and Engineering)
2018-1026-04
Life sciences
posted：2018/10/30
Highly Durable Interdigitated Electrode with Dense CNT Forests
SUGIME, Hisashi Junior Researcher (Affiliated organization Waseda Institute for Advanced Study) (retired)
collaborative researchers：NODA, Suguru Professor (retired), 大野 雄高 (retired), 牛山 拓也 (retired)
● Highly-sensitive and highly-durable IDE with dense CNT forests directly grown on electrodes at low process temperature (<500 ℃) is demonstrated.
2018-1026-03
Life sciences
posted：2018/10/30
Patterning Growth of Carbon Nanotube Forests on Metal Electrodes
SUGIME, Hisashi Junior Researcher (Affiliated organization Waseda Institute for Advanced Study) (retired)
● Patterning growth of dense CNT forests on metal electrodes was demonstrated combining with conventional lithographies (UV lithography or e-beam lithography).
